Shell Nigeria Exploration and Production Company Limited (SNEPCo)

Tender Opportunity:

Provision of Solids Control Services for SNEPCo

Tender REF: NG02002822

NipeX Tender No: 0900187

1.0 Introduction

SNEPCo hereby invites reputable and competent Nigerian Companies with the requisite expertise, experience, skilled manpower and technology to apply to be considered for inclusion in the bid list for the above contract.

2.0 Scope of Work/Service Requirements

The scope of work shall include but will not be limited to the provision of the following services:

• High Speed Centrifuges and motors
• High pressure jet washers/wash guns and mini mud vacuum to maintain rig cleanliness
• Transfer/Flush pumps and holding tanks to support the operations
• Prepare daily centrifuging reports and ROC reports
• Preventive maintenance and necessary re-certification of the above equipments
• Provide qualified and competent personnel in support of the above activities

3.0 Mandatory Requirements

• To be eligible for this exercise interested Tenderers are required to be prequalified in the Product/Service Category 30426: Cutting injections/Cutting Disposal category A-D in the NipeX Joint Qualification System (NJQS) database. All successfully pre-qualified suppliers in this category will receive a Technical Invitation to Tender (ITT)
• To determine if you are pre-qualified and to view the product/service category you are listed for, log on to www.nipexng.com and access the NJQS with your log in details, click on “Continue to Joint Qualification

Scheme tool”, click on “check my supplier status” and then click “Supplier product group”.

• If you are not listed in a product/service category, you are registered with the Department of Petroleum Resources (DPR) to do business. Contact the NipeX office at 30, Oyinkan Abayomi Street, Ikoyi, Lagos with your DPR certificate as evidence for verification and necessary update.
• To initiate the NJQS prequalification process, access www.nipexng.com to download the application form, make necessary payments and contact the NipeX office for further action.
• To be eligible, all tenders must comply with the Nigerian Content requirements in the NipeX system.

4.0 Nigerian Content Requirements

Tenderers are to note that they will be requested during the technical tender to give full details of their relevant strategy to ensure that they fully comply with the Nigerian Oil & Gas Industry Content Development (NOGICD) Act, 2010 as non-compliance will constitute a FATAL FLAW in all tender evaluations. In line with the above, Tenderers will be required to ensure that information on the following, among others, is included in their technical submission:

• Demonstrate that the entity is a Nigerian Registered Company, or genuine alliance or joint venture with foreign company with details on scope and responsibilities of parties for this work. Such companies must show evidence of joint venture binding agreement duly signed by the CEO of both companies including evidence or plans of physical operational presence and set-up in Nigeria
• International or multinational companies working through a Nigerian subsidiary must demonstrate that a minimum 50% of equipment to be deployed for execution of work shall be owned by the Nigerian subsidiary by providing a list of equipment for this tender and indicating those that will be owned by the Nigerian subsidiary
• Furnish details of company ownership and share holding structure. Also submit dear photocopies of your CAC Forms C02 and C07
• Provide evidence of what percentage of your key management positions is held by Nigerians and what percentage of the total work force are Nigerians. Also, show overall percentage of work to be performed in Nigeria and those by Nigerian resources relative to total work volume.
• Provide a Nigerian Content Plan detailing a description of the role, work scope, man-hours and responsibilities of all Nigerian companies and personnel that would be involved in executing the work. This should include details of Nigerian Content focal point or manager
• State proposed total scope of work to be conducted by Nigerian personnel (whether contracted directly or under subcontract agreements) with names and addresses including evidences of well equipped offices and workshop; attach past experience of such patronage
• Specific to this project, provide detailed plan for human capacity building of the National skill pool on the project-specific courses as stated in the ITT (including all software to be used, number of personnel, name of organization providing such training and evidence of past training record) for Nigerian personnel including description of any specific programs in place for transfer of technology and skills to indigenous businesses and Nigerians over the next five (5) years.

5.0 Closing Date:

Only tenderers who are registered with NJQS in the relevant Product/Service Category 30426: Cutting Injections/Cutting Disposal category A-D as at 29^th April 2014 being the advert closing date shall be invited to submit Technical Bids.

6.0 Additional Information:

• Expected Contract Award Date: Q4 2014
• Contract Duration: 5 years + 1 year extension option
• All respondents to Shell Nigeria advertisements must ensure full compliance with the Nigerian Oil & Gas Industry Content Development Act, 2010. Respondents should educate themselves on the Nigerian Oil & Gas Industry Content Development Act, 2010. Non-compliance will disqualify respondents from further consideration.
• This advertisement is not an invitation to tender for the above services. There is no commitment or obligation, implied or otherwise, for SNEPCo to issue a tender or enter into a contract Participation in the pre-qualification exercise does not construe or imply any commitment to any party or entitle any party to any indemnity or any form of payment from SNEPCo.

Visit us on: http://www.shellnigeria.com, https://www.facebook.com/Shell, https://twitter.com/com/shell_Nigeria

Please visit NipeX portal at www.nipexng.com for this advert and other information. Also note that this contract will be progressed through NipeX system.

Related Posts via Categories

• Tender Opportunity: Upgrade of Distributed Control Systems (DCS) & Safety Integrated System (SIS) at Bonny Oil & Gas Terminal, Shell Petroleum Development Company Limited
• Tender Opportunity; Procurement of Operational Vehicles for Total E&P Nigeria Limited
• Tender Opportunity: Provision of Services for Overhaul of Turbines Centaur50, Taurus60 and Field Operations Support Services at Total, E&P Nigeria Limited
• Tender Opportunity: Provision of Services for Overhaul of Siemens Turbines SGT100, SGT200, SGT300, Rolls Royce RB211 and Field Operations Support Services at Total E&P Nigeria Limited
• Tender Opportunity: Provision of Third Party Inspection Agency Services at Mobil Producing Nigeria Unlimited (MPN
• Expression of Interest for the Provision of Consultancy and Project Management Services for the Proposed 40” X 30 KM Odidi – Warri Gas Pipeline Expansion Project at Nigerian National Petroleum Corporation (NNPC)
• Invitation for Pre-Qualification/Expression of Interest for the Rehabilitation of NNPC – Abuja International Diagnostic centre (AIDC) located in Utako District, Abuja
• Invitation for Technical and Commercial Bids for the Engineering Procurement and Construction of 145,000 cubic meters of clean bulk liquid petroleum products storage and jetty facilities in Lagos East Atlantic Coast (Lekki Axis)
• Tender Opportunity; TB-3141 – Provision of Operation and Maintenance of Company Vehicles at Addax Petroleum Development (Nigeria) Limited
• Invitation to Pre-Qualify for the Consultancy Services of Environmental Impact Assessment (EIA) of the Proposed 24” X 5 KM Gas Pipeline and Associated TIE-INS from Obigbo Compressor Station – Obigbo North Station (Obigbo Node) in Rivers State at Nigerian National Petroleum Corporation (NNPC)