Addax Petroleum Development (Nigeria) Limited

RC No. 333615

Tender Opportunity: TB-3183 Provision of Various Marine Vessels on Call-Off Basis for Addax Petroleum Operations (Revised Advert)

Nipex Number: 1200328

Introduction:

Addax Petroleum Development (Nigeria) Limited (hereinafter referred to as “APD(N)L”) invites interested and pre-qualified Contractors to respond to this tender opportunity for the Provision of Marine Vessels for Addax Petroleum Operations, as detailed in item 2 below. The contract is proposed to commence in Q3, 2015 and continue for a duration of two (2) years with APD(N)L having the sole option to extend for an additional year.

Scope of Services:

This Scope of Services covers the provision of various marine support vessels for APD(N)L operations. The vessel types are Anchor Handling Tug Supply Vessels, Line Handlers, Platform Support Vessels, Terminal Support Vessels and Survey & Sampling Vessels.

As a minimum requirement, the selected Contractors who must be wholly Nigerian owned shall have the necessary experiences and capabilities; and shall be fully responsible for the supply of the vessels which must comply with the following:

(A)    Provision of Anchor Handler Tug Supply Vessels of the following specification:

• Engines: Caterpillar (Diesel/Electric Power Supply)
• BHP’s: Greater than 7,000
• Vessel must be equipped with on Line fuel monitoring system for all engines and fuel tanks along with online data transmitting to characters direct
• Vessel not more than seven (7) years old at the start of operations
• Draft: Maximum Draft is 4.5m
• Bollard pull: Not less than 85 metric tons
• Free deck space: Not less than 350 – 700m²
• Firefighting: Minimum FiFi 2
• Dynamic positioning: DP2
• Base Oil Capacity: Greater than or equals to 300 m³
• Capable of agitating Base Oil & Liquid Mud until delivery to Rig.
• Liquid Mud Capacity: Greater than or equals to 600 m³
• Brine Capacity: Between 600 m³ to 700 m³.
• Dry Bulk Capacity: Greater than or equals to 200 m³ in 4 or more tanks.
• Potable Water: Greater than or equals to 600 ml Drill Water; Greater than or equals to 1000 m5. Fuel Capacity: Greater than or equals to 900 rrr\
• Vessel to be fully classified (ICAS).
• Deck crane: SWL 2.5 tonnes at an out-reach of approx. 15m (quay lift).
• Minimum 1 x MOB (Rescue boat) with davit.
• Vessel to be equipped with sufficient towing winches, deck equipment and paraphernalia so as to be able to provide a full range of oil field support services including but not limited to anchor handling, towage of rigs and barges and transportation of cargo and passengers to and from APD(N)L’s Installations.
• Deck equipment: Main winch electro-hydraulic high pressure winch with 2 declutch able drums in waterfall arrangement (drum capacity 2000M of 3”) / windlass / stern roller / towing pins / shark jaws / Tuggers / Capstans.
• Main Winch: 1 waterfall type BSL300W/SL300W low pressure hydraulic with 2 drums (wire capacity 2950m of 3”).
• Secondary winch: type ALM 63050U with 2 drums (wire capacity: 3,500m of 3”).
• Fendering: Enough to cover all operations) including the one’s for vessel protection + pushing rubber bow fender
• Draft: Must be less than or equals to 4.5m
• Navigation: AIS / 2 Radars /1 Magnetic Compass / 3 gyrocompasses /1 speed log /1 digital echo-sounder /1 Auto Pilot system / 2 DGPS / GPS / 2 UPS /1 Fan beam / manual search lights.
• Anti Pollution System
• Pumps delivery rates
• Draft: Must be not less than 6.60mBallast: 100 m³/h @ 7 bars
• Fresh water: 120 m³/h @ 7bars
• Fuel Oil: 100m³/h @ 7 bars

• Pumps delivery (minimum rates):Dirty oil: 10 m3/hr @ 2 bars
• Fresh Water: 150 m3/hr @ 9 bars
• Fuel Oil: 150 m3/hr @ 9 bars
• Drill Water: 150 m3/hr @ 9 bars
• Liquid Mud: 75 m3/hr @ 18 bars (2 speed)
• Brine / Mud: 75 m3/hr @ 18 bars (2 speed)
• Dry Bulk: 80 m3/hr @ 5.6 bars, 80 psi, (2 compressors)
• Cargo Flow Meters: Fuel Oil and Fresh Water
• Special liquid (methanol): 70 m3/hr @ 70m head
• Additional beds: Minimum of 12 beds to be available for APD(N)L’s personnel.
• Refueling hoses for underway refueling operations.
• Certified fuel loading/discharge meter.
• Vessel must be equipped with all kind of adaptors to connect the hoses lines to the receiver.
• Fuel oil purifier
• IT: On-board computer network (E-mail system that supports attachment)
• Communication: 2 x Inmarsat (C and F55) / radio system compliant with GMDSS A3 /1 SSB Duplex DSC / 2 VHF / EPIRB / SART / NAVTEX /1 Iridium system / Automatic exchange telephone system with facilities in each room
• Reefer/ Freezer box connections (minimum 6connections)
• Water making facility to support daily requirement by crew on board.
• Certified fuel loading/discharge meter.Fresh water: 120 m³/h @ 7barsDry bulk: 120 m³/h @ 7 bars
• Liquid bulk: 120 m³/h @ 7 bars
• Ballast: 100 m³/h @ 7 bars

• Speed/ Fuel Consumption information to be provided (Stand-by / Economical / Full power / DP)
• Vessel must be equipped with on Line fuel monitoring system for all engines and fuel tanks along with online data transmitting to charterers direct
• Vessel must be equipped with all kind of adaptors to connect the hoses lines to the receiver.
• Fuel oil purifier
• IT: On-board computer network (E-mail system that supports attachment)
• Communication: 2 x Inmarsat (C and F55) / radio system compliant with GMDSS A3 /1 SSB Duplex DSC / 2 VHF/EPIRB / SART / NAVTEX /1 Iridium system / Automatic exchange telephone system with facilities in each room
• Main Generators and emergency generator and habour generator ratings
• Reefer/ Freezer box connections (minimum 6connections)
• Water making facility to support daily requirement by crew on board.
• Additional beds: Minimum of 8 beds to be available for APD(N)L’s personnel.
• Refueling hoses for underway refueling operations.
• Certified fuel loading/discharge meter.

(B)     Provision of Anchor Handler Tug Supply Vessels of the following specification:

• Engines: Caterpillar ( Diesel/Electric Power supply)
• BHP’s: Greater than 9.000
• Vessel not more than five (5) years old at the start of operations
• Vessel to be fully classified (Class ICAS. IMO Compliance and SOLAS approved)
• Draft: Must be less than 6.80m.
• Bollard pull: Not less than 130 MT continuous )
• Firefighting: FiFi 1
• Dynamic positioning: DP2
• Free deck space: Not less than 500 m²
• Base Oil Capacity: Greater than or equals to 400 m³
• Capable of agitating Base Oil & Liquid Mud loaded on board.
• Liquid Mud Capacity: Greater than or equals to 600 cu.m.
• Brine Capacity: Greater than or equals to 600 cu.m.
• Dry Bulk Capacity: Greater than or equals to 200 cu.m. in 4 or more tanks.
• Potable Water: Greater than or equals to 600 cu.m.
• Drill Water- Greater than or equals to 900 cu.m.
• Fuel Capacity: Greater than 800 cu.m.
• Deck crane: SWL approximately 5 MT at an outreach of approx. 16m (quay lift).
• Minimum 1 x MOB (Rescue boat) with davit, life rafts with equipment
• Vessel to be equipped with sufficient towing winches, deck equipment and paraphernalia so as to be able to provide a full range of oil field support services including but not limited to anchor handling, towage of rigs and barges and transportation of cargo and passengers to and from APD(N)L’s Installations.
• Fendering: Enough to cover all operations) including the one’s for vessel protection + pushing rubber bow fender
• Navigation: AIS / 2 Radars /1 Magnetic Compass / 3
• Gyrocompasses /1 speed log /1 digital echo-sounder /1 Auto Pilot system with forward thrusters control /1 DGPS / GPS / 2 UPS /1 Fan beam / manual search lights.
• Anti-pollution System
• Deck equipment: Main winch electro-hydraulic high pressure winch with 2 declutch able drums in waterfall arrangement (drum capacity 2950M of 3”) / windlass / stern roller / towing pins / shark jaws / Tuggers / Capstans.

• Main Winch: 1 waterfall type BSL300W/SL300W low pressure hydraulic with 2 drums (wire capacity 2950m of 3”).
• Secondary winch: type ALM 63050U with 2 drums (wire capacity: 3,500m of 3”)
• Speed/ Fuel Consumption information to be provided (Stand-by / Economical / Full power / DP)
• Vessel must be equipped with on Line fuel monitoring system for all engines and fuel tanks along with online data transmitting to charterers direct
• Stern to be fitted with a detachable ‘Gob Eye or Gob Rope hydraulic tow pins/shark jaws and hold down with a detachable bar over the stern roller. All towing capable of
• Control from the wheel house and locally.
• Bollard Pull capacity (between 50-55t)
• Bow thrusters
• The winch must be of design and brake holding capacity to safely and effectively withstand all static and dynamic loads which might be experienced during towing
• Oil dispersant (APD(N)L approved) storage capacity for not less than 25 m³.
• Sufficient fuel capacity to sustain 30days without refueling.
• Potable water capacity.
• Dispersant spray boom with mixing pump.
• Refueling hoses for underway refueling operations.
• Certified fuel loading/discharge meter.
• Bunker transfer pump which enable vessel to refuel others as may be required.
• A crane at least to be able to launch the workboat and support oil spill containment efforts (SWL5mt for a reach of not more than 10m.
• Rescue Zone conspicuously marked on deck.
• Bow, stem and sides to be designed and arranged with suitable fendering to allow for effective pushing and coming alongside export tanker. Calm buoy
• Supplied with enough life jackets.
• Email capability

(C)      Provision of Platform Supply Vessels of the following Specification:

• Vessel not more than seven (7) years old at the start of operations
• Vessel to be fully classified (Class ICAS)
• Dynamic positioning: DP2
• Engines: Caterpillar ( Diesel/Electric Power supply)
• On-line fuel monitoring system
• Fendering: Enough to cover all operations including the one’s for vessel protection + pushing rubber bow fender
• Built in Minimum FIFI 1
• Minimum unobstructed free deck space; 700 m²
• Base Oil capacity: more than 400 m³
• Liquid Mud Capacity: 1000 m³
• Capable of agitating Base Oil & Liquid Mud Loaded on boat.
• Brine capacity: more than 200 m³
• Dry bulk capacity: more than 400 m³
• Number of bulk tanks: 4
• Potable water: 800 m³
• Drilling Water: 1000 m³
• Dispersant tank: 3 m³
• Dispersant booms
• Reefer plugs on deck (6 minimum)
• Deck crane: minimum SWL 2MT at an out-reach of approx. 10m (quay lift).
• Navigation: AIS / 2 Radars /1 Magnetic Compass / 3 gyrocompasses /1 speed log /1 digital echo-sounder /1 Auto Pilot system with forward thrusters control /1 DGPS / GPS / 2 UPS /1 Fan beam / manual search lights.
• Draft: Must be less than or equals to 4.5m
• Freezer box connections (6 minimum)
• E-mail system
• Navigation: AIS/2 Radars/1 magnetic compass/3
• Accommodation for not less than 10 Company personnel
• Harbour generator engine rating
• Dispersant spray boom with mixing pump.
• Refueling hoses for underway refueling operations.
• Certified fuel loading/discharge meter.

(D)    Provision of Line Handling Tug (LHT)

• To act as a pull back/towing tug for oil tankers during crude oil export /loading operations
• To assist during inspections, testing and change out of floating loading hoses
• To participate in Oil Spilt Response and containment within the APD(N)L field
• Vessel not more than seven (7) years old at the start of operations
• Diesel fuel transfer to other vessels
• Potable water transfer to other vessels.
• Free deck space must be greater than 100m³.
• Fire Fighting
• Work boat
• Special Equipment Requirement:
• Fendering: Enough to cover all operations) including the one’s for vessel protection + pushing rubber bow fender
• Navigation: AIS / 2 Radars /1 Magnetic Compass / 3 gyrocompasses /1 speed log /1 digital echo-sounder /1 Auto Pilot system / 2 DGPS / GPS / 2 UPS /1 Fan beam / manual search lights.
• Pumps delivery rates:Ballast: 100m³/h @ 7 bars Liquid bulk: 120m³/h @ 7 bars
• Dry bulk: 120m³/h @ 7 bars
• Fresh water. 120m³/h @ 7bars
• Fuel Oil- 100m³/h 7 bars

• Speed/ Fuel Consumption information to be provided (Stand­by / Economical / Full power / DP)
• Vessel must be equipped with On Line fuel monitoring system for all engines and fuel tanks along with online data transmitting to charterers direct
• Vessel must be equipped with all kind of adaptors to connect the hoses lines to the receiver.
• Fuel oil purifier
• IT: On-board computer network (E-mail system that supports attachment)
• Communication: 2 x Inmarsat (C and F55) / radio system compliant with GMDSS A3 /1 SSB Duplex DSC / 2 VHF / EPIRB / SART / NAVTEX /1 Iridium system / Automatic exchange telephone system with facilities in each room
• Reefer/ Freezer box connections (minimum 6 connections)
• Water making facility to support daily requirement by crew on board.
• Additional beds: Minimum of 8 beds to be available for APD(N)L’s personnel.
• Refueling hoses for underway refueling operations.
• Certified fuel loading/discharge meter.

(E)       Provision of Survey and Sampling Vessels of the following specification:

• BHP’s: Greater than 7,000
• Engines: Caterpillar (Diesel/Electric Power Supply)
• Vessel must be equipped with On Line fuel monitoring system for all engines and fuel tanks along with online data transmitting to characters direct
• Vessel not more than seven (7) years old at the start of operations
• Draft: must be less than or equals to 4.5m
• Bollard pull: Not less than 85 metric tons
• Free deck space: Not less than 350-700m²
• Firefighting: Minimum FiFi 2. (Approved by Class of the proposed vessel) / remote controlled from the wheelhouse/ minimum: 2400 m3/h / 2 water monitor @ 1200 m3/h @ 12 bars (with foam capacity 300m3/h) / Pumps: e X 1500m3/h @ 14 bars each / Deluge system.
• Dynamic positioning: DP2 (Sensors and monitoring as per Class 2 requirements) allowing automatic tracking, automatic speed control and dynamic positioning.
• Base Oil Capacity: Greater than or equals to 300 m³
• Capable of agitating Base Oil & Liquid Mud until delivery to Rig.
• Liquid Mud Capacity: Greater than or equals to 600 m³
• Brine Capacity: Between 600 m³ to 700 m³.
• Dry Bulk Capacity: Greater than or equals to 200 m³ in 4 or more tanks.
• Potable Water: Greater than or equals to 600 m³.
• Drill Water: Greater than or equals to 1000 m³.
• Fuel Capacity: Greater than or equals to 900 m³
• Vessel to be fully classified (Class ICAS, IMO Compliance and SOLAS approved group’.
• Vessel to be fully classified (Class ICAS).
• Deck crane: SWL 2.5 tonnes at an out-reach of approx. 15m (quay lift).
• Minimum 1 x MOB (Rescue boat) with davit.
• Vessel to be equipped with sufficient towing winches, deck equipment and paraphernalia so as to be able to provide a fu range of oil field support services including but not limited to anchor handling, towage- of rigs and barges am transportation of cargo and passengers to and from APD(N)L’s Installations
• Deck equipment: Main winch electro-hydraulic hig pressure winch with 2 declutch able drums in waterfall arrangement (drum capacity 2000M of 3”) / windlass / stern roller / towing pins / shark jaws / Tuggers / Capstans, Main Winch: 1 waterfall type BSL300W/SL300W low pressure hydraulic with 2 drums (wire capacity 2950m of 3”).
• Secondary winch: type ALM 63050U with 2 drums (wire capacity: 3,500m of 3”)

Classification Requirement for the four types of vessels:

• Vessel to be classed with an IACS member in order to have certificate of class notations
• Vessel to meet all IMO and Flag state requirements

All other related equipment, tools and experienced personnel necessary to satisfactorily perform the Services.

The selected Contractors will be responsible for the mobilisation and subsequent demobilisation of their equipment, tools and personnel between place of origin and APD(N)L’s locations where the Services are to be performed.

Award Strategy:

Bidders will be allowed to bid for all vessels but separately per lot with regards to the types of vessel. Award shall be made to the three lowest bidders per lot at the lowest bidder’s rates in ratio of 50:30:20 of the contract ceiling value. Please note that first consideration will be given to the vessels in-country.

(4)     Mandatory Requirements:

(4.1)  To be eligible for this tender exercise, interested Tenderers are required to be pre-qualified in any or all of the following; 3,08.01 Tugs/ROV Support/Diving Support Vessels, 3.08.17 Supply Vessels or 3.08.18 Standby Vessels Cat A, B. C & D (Product/Service) category in NipeX Joint Qualification System (NJQS) database. Ail successfully pre- qualified suppliers in this category will receive invitation to Tender (ITT)

(4.1.1)         To determine if you are pre-qualified and view the product/services category you are listed for: You may visit NipeX NJQS Website at www.nipexng.com and access NJQS with your log in details, click on ‘continue Joint Qualification Scheme tool, click on ‘check my supplier status’ and thereafter click on’ supplier product

(4.1.2)         If you are not listed in a product/service category that you are registered with DPR to do business, you may contact NipeX Office at 30, Oyinkan Abayomi Street, Ikoyi, Lagos, with your DPR certificate as evidence for verification and necessary update.

(4.1.3)         To initiate the JQS Pre-qualification process, you may access www.nipexng.com to download the requisite application form, make necessary payments and contact NipeX office for further action.

(4.2)                In addition to 4.1 above, Tenderers shall also be required to comply with the Nigerian Content requirements in the NipeX system

(5)     Nigerian Content Requirements:

Tenderers are to note that they will be requested during the technical tender to provide details of their relevant strategy to ensure that they fully company with the Nigerian Oil & Gas Industry Content Act, 2010 as provided at www.nigcontent.com, in view of the fact that non-compliance will constitute a fatal flaw in all contract evaluations.

In light of the above, Tenderers shall be expected by the Nigerian Content Development Monitoring Board (NCDMB) to:

• Demonstrate that the entity proposed for execution of the service, is a Nigerian Indigenous Company, or Nigerian Indigenous Company as the contracting entity in genuine alliance or joint venture with foreign company with details on scope and responsibilities of parties for this work. Such companies must show evidence of joint venture binding agreement duly signed by the CEO of both companies including evidence or plans of physical operational presence and set-up in Nigeria
• Furnish details of company ownership and share holding structure, with photocopies of its CAC Forms C02 and CO7
• Provide evidence of what percentage of its key management positions are held by Nigerians and what percentage of the total work force are Nigerians. And also show overall percentage of work to be performed by Nigerian resources relative to total work volume.
• Provide a Nigerian Content Plan with detailed description of the role, work scope, man-hours and responsibilities of all the Nigerian companies and personnel that will be involved in executing the work.
• State proposed total scope of work to be conducted by Nigerian personnel (whether contracted directly or under subcontract agreements) with names and addresses including evidences of well equipped offices and workshop.
• Provide detailed plan for staff training and development on engineering, project management and procurement (including ail software to be used, number of personnel, name of organization providing such training and evidence of past training record) for Nigerian personnel including description of any specific programs in place for transfer of technology and skills to indigenous businesses and Nigerians over the next five (5) years.
• Provide evidence of domiciliation of project management and procurement centers in Nigeria with physical addresses (not P.O. Box).
• Provide detailed description of the location of in-country facilities (Equipment, storage, workshops, repair, maintenance and testing facilities).
• Provide detailed statement with evidence of how it intends to maximize the use of Nigerian made goods and services.
• Provide details on any other Nigerian Content initiative the company is involved in.
• Names of Barge(s) and copies of vessels certificate of registration to be attached.
• Provide evidence to show that the nominated vessels are categorized in the NCDMB NJQS marine vessel categorization database.
• Documented evidence of vessel ownership, including any commercial, technical or legal interest held by any other entity(s) in the vessels to be considered.
• Provide evidence of Nigerian Content Equipment Certificate (NCEC)

(6)     Closing Date:

Only Tenderers who are registered with NJQS Product/category 3.08.01 Tugs/ROV Support/Diving Support Vessels, 3.08.17 Supply Vessels or 3.08.18 Standby Vessels Cat A, B, C & D as at 13^th May, 2015, being the advert closing date shall be invited to submit Technical and Commercial Bids.

Additional Considerations:

Please note that all interested Contractors are required to strictly adhere to following conditions in relation to their response to this Advert:

• As stated in item 3 hereto, Contractors are required to be pre-qualified in NJQS under this specific Services category to be eligible to participate in this tender opportunity.
• All costs incurred in preparing and processing NJQS pre-qualification and responding to this Tender Opportunity shall b e to the Contractor’s own account.
• This Advert shall neither be construed as any form of commitment on the part of APD(N)L to award any contract to any Contractor and or associated contractors, sub-­contractors or agents, nor shall it entitle pre-qualified Contractors to make any claims whatsoever, and/or seek any indemnity from APD(N)L and/or any of its partners by virtue of such Contractors having been pre-qualified in NJQS.
• The tendering process shall be undertaken in accordance with the NNPC contracting process which requires pre-qualified Contractors to submit their documentation in the following manner:
• Pre-Qualified contractors in the relevant Product/Services category in NJQS will be requested to submit their Technical and Commercial Tenders at the same time.
• The Technical Tenders will be opened first and evaluated. However, only technically acceptable and financially qualified contractors will have their Commercial Tenders opened and analysed.
• APD(N)L will communicate only with authorised officers of the qualifying Contractors at each stage of the Tender process, as necessary, and will NOT communicate through individuals or appointed Agents.
• This advert supersedes our earlier advert of 29^th April, 2014.

Please visit the NipeX portal at www.nipexng.com for this Advert and other relevant information.

Related Posts via Categories

• Invitation for Technical and Commercial Bids for the Engineering Procurement and Construction of 145,000 cubic meters of clean bulk liquid petroleum products storage and jetty facilities in Lagos East Atlantic Coast (Lekki Axis)
• Expression of Interest for the Provision of Consultancy and Project Management Services for the Proposed 36”& 24” Gas Pipelines and TIE-INS of the Ukanafun Station – Obigbo Node Project at Nigerian National Petroleum Corporation (NNPC)
• Addendum to Invitation for Technical and Financial Bids for the Construction of a 300 Seater Lecture Theatre at Petroleum Training Institute, Effurun, Delta State
• Invitation to Tender for the Engineering, Procurement, Construction and Commissioning (EPCC) of 40″ X 30km Class 600 Gas Pipeline for the Proposed Odidi – Warri Gas Pipeline Expansion Project at Nigerian National Petroleum Corporation (NNPC)
• Invitation for Technical and Financial Bids for the Construction of a 300 Seater Lecture Theatre at The Petroleum Training Institute, Effurun, Delta State
• Tender Opportunity: Provision of Filtration Services at Star Deep Water Petroleum Limited
• Tender Opportunity: Provision of Security Services for Nigerian Agip Oil Company (NAOC) Lagos Locations
• Tender Opportunity: Open Contracts for Civil Works Construction, Rehabilitation and Maintenance of Access Roads in Nigerian Agip Oil Company (NAOC) Land Area
• Tender Opportunity: Wireline Logging, Perforation & VSP Services at Nigerian Agip Oil Company Limited
• Tender Opportunity: Procurement, Construction, Installation and Commissioning (PC) Works for the Gas Pipeline System from NAOC OB/OB Gas Plant to NIPP EGBEMA at Nigerian Gas Company Limited (NGC Ltd)